L.O.E. STRIPPER LOW ODOR FINISH AND WAX EMULSIFIERL.O.E. STRIPPER
LOW ODOR FINISH AND WAX EMULSIFIERPRODUCT DESCRIPTION:
L.O.E. STRIPPER is an extremely aggressive finish and wax emulsifier, specially formulated for use in confined areas and where typical strong stripper odor presents a problem. This unique stripping compound is light orange in color and is non-viscous.
L.O.E. STRIPPER offers users these unique features and benefits:
LOW ODOR. LOW VOC'S:
L.O.E. STRIPPER is fragrance free and free of chemical substances that cause unpleasant odors. Low VOC's (volatile organic compounds). L.O.E. Stripper will not negatively affect indoor air quality. Excellent for use in health care facilities and confined areas. Use L.O.E. STRIPPER anywhere and anytime ... 24 hours a day!
NO BUTYL:
Contains no butoxyethanol ... an important feature where the use of butyl is restricted and for those who prefer a non-butyl stripper.
HIGH PERFORMANCE - EASY RINSE:
L.O.E. STRIPPER's high performance solvent base speeds the emulsification process of cross-linked acrylic finish. L.O.E. STRIPPER works fast and efficiently. Even heavy build ups require little effort for removal. L.O.E. STRIPPER rinses easily and no flood rinsing is required. A real time and labor saver.
CONCENTRATE FORMULATED FOR HIGH DILUTION AND MAXIMUM ECONOMY:
L.O.E. STRIPPER is a true concentrate and as a consequence, economical in use.
Dilute L.O.E. STRIPPER up to 1:20 (6 oz./gal. of water) and remove even tough finish build-ups.
DIRECTIONS FOR USE:
Some individuals may be sensitive to ingredients in this product. Before using, read product label and MSD sheet. Wet floors may be slippery. Prevent pedestrian traffic with signs or barricades.
1. Depending on build-up, dilute L.O.E. Stripper from 1:1 to 1:20 (6 oz. to 128 oz./gal. of water) with warm water. When minimal fragrance is desired, dilute L.O.E. Stripper with room temperature water. Automatic scrubbers: dilute up to 1:10 (12 oz./gal. of water).
2. Liberally apply L.O.E. Stripper with mop to small section (100 sq. ft.) of floor. Be sure to completely cover floor to baseboards.
3. After 3 to 5 minutes, agitate the wetted section with mop or machine scrub. Pick up solution using mop, wet vac or automatic scrubber.
4. Detail damp mop with clear water to remove residue or squeegee tracks as necessary. Flood rinsing is not required before recoating.
WHO CAN BENEFIT:
Due to its low, nearly non-existent odor and the fact that the formula does not contain butoxyethanol, L.O.E. Stripper is a natural for the following:
Hospitals Nursing Homes
Physicians' Offices Dentists' Offices
Emergency Care Centers Veterinary Clinics and Offices
Schools Day Care Centers
Hotels and Motels Restaurants
Fast Food Chains Cafeterias
Delis Supermarkets
Casinos Movie Theaters
Airports Bus Terminals
Train Terminals Military Ships
Cruise Ships Department Stores
Discount Stores Convenience Stores
SPECIFICATION DATA:
Total Active Ingredients - 39.7%
Specific Gravity - 1.018 @ 24oC/75oF
pH Concentrate - 13.0-13.7
Cloud Point - None
Solvent - Diethylene glycol monobutyl ether
Flash Point (Cleveland Open Cup) - None
Stability -
a. Shelf @ 24C/75F - In excess of one year
b. Accelerated @ 49C/120F - In excess of 90 days
c. Freeze/Thaw Cycle - Freezes and thaws with complete clarity
Rinsability - rinses completely in hot or cold water.
Biodegradable
Phosphate free
PACKAGING:
L.O.E. Stripper is available in 275-gallon, DOT approved disposable totes; 55, 30 and 15-gallon drums, 5-gallon pails and gallons, four per case. Label copy is provided in both English and Spanish. Secondary labels are also available.
Be sure to read all Directions, Precautionary and First Aid Statements on product labels before use of this or any Spartan product. If questions remain, consult your employer or a physician. Material Safety Data Sheets for all Spartan products are available from your authorized Spartan distributor or by visiting www.spartanchemical.com.
GUARANTEE:
Spartan's modern manufacturing and laboratory control insure uniform quality. If dissatisfied with performance of product, any unused portion may be returned for credit within one year of the date of manufacture.
